PORSCHE 911 EXHAUST GAS LINE
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 1 x 3.5"(90mm) oval tip
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled qualit...(choose a part on the right to read more)
General Fitment 911 1989-94
$8,518.40
Make a selection
The ultimate stainless steel system for the street. Completely civilized while cruising and opens at higher rpms. Quieter than the street / clubsport versions. More low and mid-range torque. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 25 crank hp & +24 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - t 316 lightweight stainless steel for improved durability over t 304. - 3.5" (90 mm) dual oval, double walled polished tips included. - intoxicating growl at idle, partial thrott...(choose a part on the right to read more)
General Fitment 911 1994-98
From $10,723.61
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s separately.
Figures:
Gen...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,947.80
Make a selection
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech has engineered to have a rich, deep tone in the lower rpms and a pronounced flat six note at higher rpms. With this new designed speedtech adds substantial horsepower and torque gains, along with improved throttle response are achieved with the free flowing, unrestrictive 70mm design. The 70mm tubing is utilized throughout, including the outlet pipes, which reduces back pressure and enables quick turbo response. The speedtech ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$3,233.25
Make a selection
"brombacher" racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weights 6 kg
- 33 kg savings over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- no dme programming neces...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$11,661.10
Make a selection
Also out of the "Brombachercollection. This 996 GT3 GT exhaust system features a 70mm diameter with 200 cell sport catalytics. This system is made out of stainless steel. We can now offer more power for your GT3 due to the larger 70mm diameter especiall in the lower rpms and less weigth.
This complete system includes
- 200 cell sport cats
- sidemufflers
- 2 x 90mm tips
- please send us your mounting brackets to be modified or order 1 x bes 996 000 000.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufacture...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
$8,089.40
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- bypass-catalytics
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming necessary 2nd gen
The FVD...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $3,177.67
Make a selection
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- catalytic bypass
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggressive sound similar to the 997 cup car. Our exhaust ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,331.80
Make a selection
Brombacher race exhaust system for 997 GT3/rs (super sound) with rsr style tips & center muffler adapters to run stock center muffler.
Facts:
- + 25 crank hp & + 25 crank torque with use of stock center muffler.
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (90 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 34.7 lbs. (15.7 kg) this is the lightest stainless system in the Brombacherline !**
- 51.8 lb (23.5 kg) savings over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- bypass' center muffler with straight p...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$4,978.60
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 60...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,835.10
Make a selection
"brombacher" exhaust system for 997 GT3/rs (sound version) with rsr style tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 2 3/4" (70mm) angle cut rsr center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,507.40
Make a selection
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
Special order item !
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (includes FVD software, sport airfilter and exhaust):
Max. Power - 283kw (3...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,826.40
Make a selection
Product details:
Direct replacement for restrictive factory headers; optimized for increased flow and quicker turbo spool
Features:
-fits all 911 turbo 930 vehicles (1976-1989)
-improves power delivery much sooner in the rpm range compared tot he restrictive OEM heat exchangers
-constructed from 14-16 gauge, c.n.c. Mandrel bent t304 stainless steel with high velocity 3-in-1 pyramidal investment cast merge collector for improved exhaust scavenging.
-this system will include a drip accumulator with double swivels and aeroquip lines with adapters and a graphite steel layered gasket for the drip accumulator.
-7/8” ...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$3,136.25
Make a selection
- + 25 crank hp & + 27 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3"(90mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Weight savings:
997 GT3 OEM exhaust weight:
Stock primary ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,549.20
Make a selection
"brombacher" (sound version) stainless steel mufflers
(3.6l model need end tips from 3.8l model, FVD 111 997 01 or FVD 111 997 03, larger pipe implementing equal more power).
Facts (based on 997s):
- + 10 crank hp & + 10 crank torque
- 2 1/2? (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The export sound version of our "brombacher" sport mufflers gives the 997 a more pronounced, aggressive sound compared to factory mufflers. These end-muffl...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,786.40
Make a selection
+650hp 997 tt (sound version) stainless steel exhaust system
The +650 hp FVD sport exhaust system is specially designed for vehicles with performance increases of more than 485kw (650ps). Back pressure is extremely reduced trough specific guidance and piping in the exhaust muffler.
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 35 lbs. (16,1 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit. However, we do not recommend the use of stock ti...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,049.20
Make a selection
Brombacher edition valved mufflers are the perfect compromise for you and your loved ones. This set of mufflers offers Porsche® cup car like decibels with low, deep tones along with gurgling and crackling with the valves open. Mayhem can then be reined in, to subtle, OEM decibels with the valves closed. So, the best of both worlds are on tap for many happy Porsche® excursions.
+ 10 hp & + 8 tq gain.
- 2 1/2" (63.5 mm) tubing diameter (reduces thermal stress).
- t 316 stainless steel for improved durability over t 304.
- absolutely no drone in the cabin with or without the valves open.
- does not interfere with emissions and will not trigger the check engine light.
- ecu programming (software) is n...(choose a part on the right to read more)
General Fitment 911 2005-08
$3,174.70
Make a selection
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech exhaust system provides improve throttle response and increased hp. Fitment is perfect and the OEM tips are re-used for a factory look. High quality welds, low restriction design and a mirror polished finish combine to create an exceptional performing, fantastic sounding, high quality exhaust with a mirror polish for a beautiful finish. The exhaust is made from 16 gauge, t-304 stainless steel and features 2.5 inch piping for a...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,957.50
Make a selection
+650hp 997 tt (sound version) stainless steel exhaust system
The +650 hp FVD sport exhaust system is specially designed for vehicles with performance increases of more than 485kw (650ps). Back pressure is extremely reduced trough specific guidance and piping in the exhaust muffler.
- 200 hd cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 39 lbs. (18,1 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- dme programming necessary.
We use the latest hjs cats, they are nicknamed ?hd? For high d...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$5,864.23
Make a selection
Back pressure is extremely reduced trough specific guidance and piping in the exhaust muffler.
- 200 hd cell high flow, tri metal German hjs sport catalysts
- weighs 39 lbs. (18,1 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- dme programming necessary.
We use the latest hjs cats, they are nicknamed ?hd? For high durability matrix design catalytic converters. They have a sm-matrix (winding of three flat and corrugated foils) and a special connection to the matrix sheath, which equates to extremely high durability for track and street use. The added benefit is that ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $5,815.70
Make a selection
"brombacher" titanium exhausts are the absolute last word in exhausts for the 997 GT2.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
From the turbo flanges and catalytics (available in 100 or 200 cells), to the tailpipes (Ø 2x85mm), this entire exhaust system (excluding the cells themselves) is made entirely of titanium. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest heat v...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$12,395.90
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,994.80
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,731.90
Make a selection
"brombacher" exhaust system for 997.2 GT3/rs with valves for the best of both worlds.
facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- valved system with sound switch for quiet sound and export sound for the track.
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 90mm center exit tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open t...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $8,880.30
Make a selection
- + 25 crank hp & + 19 crank torque (manufacturer estimate, dyno testing information will be available shortly)
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 2 3/4"(70mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programm...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$9,179.50
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|